Skip to content
LUGGAGE TAG MAKER

3D Printed Luggage Tag Maker for Custom Travel ID Tags

Design a custom 3D printed luggage tag from a photo, monogram, or logo. Standard 85.6 × 54 mm card proportions, a reinforced hanging hole, and multi-color 3MF export for durable travel tags.

Luggage Tag and Bag Tag Generator

Upload artwork at a credit-card aspect ratio. The generator builds a 2.4–3.0 mm tag with a hanging hole and named color layers, ready for PETG printing.

Active PlanFree Maker Tier
Remaining ExportsSign in · 1 free export/day

01Input Artwork / Logo / Photo

SVG · PNG · JPG · WebP
Try instant demo:Click to load & preview

02Bambu AMS & Slicing Setup

Auto-Z Offset
Target Width (Scale to mm)60.0 mm
mm
AMS Filament Channels4 Colors Active
AMS Filaments & Layer Isolation
Base Plate (Floor)2.0mm
Slot 1: PLA Basic Jade White
Slot 2: PLA Basic Black
Slot 3: PLA Basic Grey
Slot 4: PLA Basic Silver
Layer Height Preset0.16 mm
Base Thickness (Z-Floor)2.0 mm
Keychain Ring Cutout (3.5mm)Starter+
Adds cylindrical negative cutout for split key rings & straps.
Bambu Filament Auto-MatchingLifetime
Auto-cluster image colors to official Bambu PLA filament codes.
Flush Waste Reduction OptimizationLifetime
Order layer transitions to minimize AMS purging waste.
High-Precision Curve SmoothingCommercial
Sub-pixel chamfer filtering for smooth commercial prints.

03Multi-Material 3D Live Preview

Bambu Studio Ready
Bambu 256×256 PEI Bed
Drag to orbit · Pinch zoom
Drop directly into Bambu Studio, OrcaSlicer, or PrusaSlicer

Why Native .3MF Instead of Standard .STL?

Standard STL files collapse all colors into one single monochrome mesh, forcing you to spend hours manually painting triangles in your slicer. Our generator exports an open-standard 3MF archive with individual color objects and stepped Z-coordinates, giving you instant zero-effort AMS assignment.

From Your Image to a 3MF Model

Adjust your model in the browser, inspect the preview, and check the exported geometry in your slicer before printing.

STEP 01

Upload Card-Ratio Artwork

Design at 1.585:1 (85.6 × 54 mm). A monogram, bold logo, or high-contrast photo all work; keep text at least 6 mm tall.

STEP 02

Set Travel-Grade Thickness

Use 2.4–3.0 mm. Thinner tags curl in a suitcase; thicker tags add unnecessary weight and print time.

STEP 03

Scale to 85.6 × 54 mm

Scale the model uniformly in the slicer, enable the hanging hole, then print in PETG and add a strap or ring.

Image Processing and Model Export

Review the processing workflow and choose settings that match your artwork and printing requirements.

Credit-Card Proportions

The page is built around the 85.6 × 54 mm standard, so the finished tag fits common luggage loops and ID holders.

Reinforced Hole Zone

The hanging hole sits in a solid base area; keeping artwork clear of that corner prevents a cracked rim.

High-Contrast Color Layers

Two colors — a dark background and a light monogram — stay readable under airport lighting.

Photo, Logo, and Monogram Support

Any flat artwork works. For names, add lettering in your design app before export; the converter has no text field.

Flat Back for Strap Fit

A continuous flat back sits cleanly against a suitcase handle and does not snag on fabric.

Private Design Handling

Artwork is processed in the browser only. Avoid embedding a home address in the image; use initials or a surname instead.

Why 85.6 × 54 mm is the size to aim for

That is the ISO ID-1 credit-card footprint, and it happens to be the size most luggage loops, badge holders, and travel wallets are built around. A tag at that size slides into a loop without folding, and it is large enough for a bold surname and a two-color mark.

The generator’s native footprint maxes out near 96 mm, so a card-size tag is a modest 0.89× downscale rather than an upscale. That keeps the hole, wall thickness, and color steps at their designed proportions.

Tag styleSizeScaleBaseNotes
Card standard85.6 × 54 mm0.89×2.4 mmFits most luggage loops
Large bag tag96 × 60 mm1.0×2.6 mmNative max, easiest to read
Carry-on mini70 × 44 mm0.73×2.0 mmLight, suits small handles
Backpack hang tag60 × 90 mm0.94×2.4 mmVertical art, hole at top corner
Common tag sizes and how they map to the native 96 mm model.

Adding a name or monogram without a text field

There is no text input in the converter, and that is deliberate: typography belongs in a design tool where you can control weight, spacing, and outline. The practical workflow is to set the name in your editor, export it at the exact tag ratio, and let the converter turn it into relief.

For a surname, use a heavy geometric sans at 6–8 mm cap height. For initials, a monogram at 20–25 mm reads from across a baggage carousel. Keep at least 8 mm between the lettering and the hanging-hole corner so the rim stays intact.

  • Set the canvas to 856 × 540 px at 10 px/mm, or 1712 × 1080 px for a 2× export.
  • Convert text to outlines if your editor exports SVG, so the font is not substituted.
  • Use two colors at most: light lettering on a dark background survives airport lighting.
  • Do not include a full home address, phone number, or booking reference in the artwork.
  • Add a thin border if the tag will be printed in a light color; it frames the edge and hides layer lines.

Material and durability checklist

A luggage tag lives a harder life than a keychain: it gets compressed, dragged, rained on, and left in hot places. Treat the material choice as part of the design, not an afterthought.

  • PETG at 240–250 °C with 40 percent fan for layer adhesion; dry the spool if it has been open for months.
  • Print 3 walls and 20–25 percent infill so the hole area resists tearing.
  • Orient the longest side along the X axis for better dimensional accuracy on a bed-slinger.
  • Do not anneal a thin tag; it will bow. Let it cool on the plate instead.
  • Round the corners in the artwork if you want a softer edge; the converter follows the silhouette.
  • Test the strap before travel: hang the tag with 2 kg for an hour and inspect the hole rim.
Slicing & 3D Printing Specification Matrix

Calibrated Production Parameters

Tested slicing recommendations for Bambu Lab X1C / P1S / A1, OrcaSlicer, and Prusa MMU3 systems.

Target Card Size
85.6 × 54 mm
Credit-card proportions fit most luggage loops and clear badge holders.
Scale from Native
0.89× at 96 mm
A native 96 mm model scaled to 85.6 mm keeps the 5 mm hanging hole usable.
Recommended Material
PETG or ASA
PLA softens in a hot car or on a tarmac; PETG survives impact and 60 °C-plus heat.
Tag Thickness
2.4 – 3.0 mm
Three millimeter tags stay flat inside a case and resist corner cracking.
Hanging Hole
Automatic corner punch
Pair it with a 20 mm loop strap rather than a thin metal ring, which cuts through plastic.

Related 3D & Creative Asset Workflow

Connect your 3MF printing workflow with companion maker and voxel generation platforms.

View All Tools
ImageToBlock

Convert images into 3D voxel blocks & pixel art models for Roblox and Minecraft.

Kuvatom

AI 3D asset generation and custom avatars for Discord communities and virtual worlds.

How do I make a durable 3D printed luggage tag?

To make a 3D printed luggage tag: 1) Design artwork at 85.6 × 54 mm (1.585:1) and export it as PNG or JPG; 2) Upload it to the Luggage Tag Maker; 3) Use a 2.4–3.0 mm base and enable the hanging hole; 4) Export the 3MF and scale it to 85.6 × 54 mm in the slicer; 5) Print in PETG, not PLA, for heat and impact resistance; 6) Thread a 20 mm loop strap through the hole. Avoid printing a full home address — initials and a surname are safer.

Citations & Sources

Frequently Asked Questions

How do I add a name without a text tool?

Create the name in Canva, Illustrator, Affinity, or any editor using a bold sans-serif at 6–8 mm cap height. Export a flat PNG at the card aspect ratio, then upload it. The converter turns those letters into relief as part of the image.

Will a PLA luggage tag survive a flight?

PLA can deform in a hot car, a checked bag on a tarmac, or direct sun. PETG is the safer default, and ASA is better for long outdoor exposure. If you only print PLA, keep the tag in a carry-on and avoid leaving it on a dashboard.

What strap fits the hanging hole?

Use a 20 mm wide loop strap, a short bungee loop, or a plastic luggage-loop fastener. A thin metal split ring concentrates load on one point and will eventually cut through the rim, even in PETG.

Is 85.6 × 54 mm large enough for a photo?

A face can read at that size if it fills most of the tag, but a landscape photo becomes muddy. Monograms, logos, flags, and bold pet silhouettes work far better than group photos on a travel tag.

Can I print both sides?

The generated model is single-sided with a flat back. Print two mirrored plates and glue them back-to-back with epoxy if you need a two-sided tag, or design a separate back plate.

Related 3MF & 3D Maker Tools

Create a 3MF Model from Your Artwork

Preview your geometry, export within your image-generator plan, and set up materials and printing in your slicer.

Open Interactive Workbench